For Sale: 2 meter (144 MHz) Ham Radio Rig

Includes
Alinco 50 Watt 2-meter-band radio transceiver
Samlex 10 Amp 12 volt power supply
Just add an antenna...

1) The Radio -- Alinco DR-150T

2M 50W transceiver w/extended receive 108-173.995/440-449MHz

Features

- UNIQUE "Channel Scope" shows activity on adjacent freq's or channels
  +/- 20kHz - 60kHz OR +/- 3 memory channels (each side of center freq)
- Transmit range:  144.0 MHz - 147.995 MHz
- Power Output:  10w, 25w, 50w
- Receive range: 108.0 MHz - 173.995 MHz, 440.0 MHz - 449.995 MHz
- AM receive/aircraft
- Memory channels: 100, includes 1 call channel
- Memory contents: receive freq, TX offset, tone setting, tone encoder
  frequency, tone decoder frequency, DSQ squelch
- Dual VFO's A + B
- Standard +/- 600kHz and custom splits
- Programmable upper/lower scan limits, memory lock-outs
- Programmable DTMF "speed dial"
- CTCSS encode/decode
- DSQ (Digital Coded Squelch), Group and private pager modes
- 1200/9600 baud packet (includes dedicated 9600 baud port)
- Control radio remotely using DTMF keypad
- Multiple radios can be cloned over-the-air! NO WIRES NEEDED
- Input Voltage: 13.8vDC nominal

The Alinco DR-150TQ is loaded! Full 50 watts out on 2 Meters plus receive 440 MHz and receive aircraft band. The channel scope display functions in both VFO and memory mode. 

Two VFOs and 100 memories are featured. The DR-150TQ comes standard with 50 CTCSS tone encoder, 9600 bps/phone patch interface jack. 

The EMS-12 DTMF mic also permits direct frequency entry. The EJ-20U CTCSS Tone Squlech Decoder is standard in this "Q" version. This radio even supports air cloning and three power output levels (50/25/10 watts). This radio is 5.5 x 1.6 x 5.1 inches 1.8 lbs. 

Rave reviews at https://www.eham.net/reviews/view-product?id=258

The radio is super clean (see photos) and includes all accessories: mic, mounting bracket, manual...
It comes pre-programmed with the standard Santa Barbara region repeaters and simplex frequencies.


2) The Power Supply — Samlex RPS1207 

Regulated DC Power Supply 13.8 VDC 7-10 amp Output

Input: 120VAC
Output: 13.8 VDC 7-10 Amps (i.e., up to 138 Watts)

Almost new


For sale only because I'm moving to the hills and need to get a more powerful system with a big antenna...


Contact Stephen (W6STP) @ T: (805) 895-6252


--

                    Stephen Travis Pope   Ojai, California, USA