Dave - did you test it first, and if so, were you having the same issue I described? --On Friday, February 14, 2025 1:18 PM -0800 Dave Schmidt <dgschmidt@gmail.com> wrote:
Thanks Ken, I just converted mine.
Dave
On Friday, February 14, 2025, Ken Alker <ka6ken@alker.net> wrote:
I've been chasing my tail for a couple of days trying to figure out why I can key up DMR repeaters but my QSO is not broadcast to other repeaters; it only stays local. It appears that Brandmeister is no longer routing QSO's from 7-digital personal radio ID's starting with a "1" (and eventually 6-digit repeater Radios ID's starting with a "1", so be ware if you run a repeater)! They say it'll work until 1/1/26, but mine was NOT and changing my RadioID solved the problem.
Note that this requires reprogramming of all your radios (and repeaters).
Read following if you have a RadioID that starts with a "1" (note the Jan 28th update near bottom):
<https://news.brandmeister.network/important-message-for-brandmeister-usa -hams-using-a-radio-id-starting-with-1/>
Ken ------------------------------ This email came from the SBARC Digital mailing list. To unsubscribe, send an email to: digital+unsubscribe@sbarc.org
New members can subscribe by sending an email to: digital+subscribe@sbarc.org