Yes indeed. AMI's of that era always get a silicon bridge rectifier (and fuses) and lamp cord wire. The zip cord going to the mech appears to be soft and supple but I'll replace that anyway. Someone replaced the power cord on the amp but I haven't looked inside the rusty amp yet to see if anything was done. They used brown cord, I may have to make it black. I always have a roll of black and a roll of brown. I just ordered 250' rolls of each a couple months ago. -- Tony Miklos Tony's Jukebox Repair On 2/6/2025 2:09 PM, David Breneman via Jukebox-list wrote:
On Thursday, February 6, 2025 at 05:05:52 AM PST, Jukebox Repairman via Jukebox-list <jukebox-list@lists.netlojix.com> wrote:
Painting the cab is easier than veneer😀
Several hours ago I replied to this, including Aaron Heverin's notes on painting thecabinet, but it's held up awaiting moderator approval because of the size. But,I'll reiterate my warning (just in case you don't know) to make sure you start byreplacing all the zip-cord wiring in the lighting and mechanism wiring harnessesbecause the insulation is natural rubber which gets brittle and breaks off.
_______________________________________________ Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/