On 2024-08-02 12:05 p.m., Tony Miklos via Jukebox-list wrote:
I have a customer who wants to bring it here but has no shipping bolts and I don't know the size offhand. (He hasn't even found the holes yet.)
Can anyone help with that?
Thanks, Tony ________
From the manual: *Install the shipping bolts through the mechanism base on each side and completely tighten. * *Note: The mechanism base must be in contact with the wooden platform and the springs must be fully compressed. * Not a word about what the bolt IS though - at least in my PDF copy. As for the bolt size? Not certain, but I suspect a 3 to 4 inch 3/8 inch bolt with a large flat washer would work. Home Depot to the rescue? These bolts are inexpensive, just have him/her stick a pencil in the hole and see if it binds - or use various drill bits by hand to figure out the ID of the threaded hole and use that to find a suitable bolt. Obviously the testing with the drill bits is by hand! Don't want to damage the threads!! John :-#)# -- John's Jukes Ltd. 7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 Call (604)872-5757 (Pinballs, Jukes, Video Games) flippers.com "Old pinballers never die, they just flip out"