The M44MR is a perfect fit.
You can tailor your C or 7 to fit by slicing away carefully the top plastic around the 2 screw mounts and then it will sit up in the arm recess the same as the MR does. It adjusts much easier then in terms of not hitting the gripper arm, and raising the correct height when the song has ended.
Nigel
>
> On 22 Mar 2023 at 09:49, Federico Croci via Jukebox-list <jukebox-list(a)lists.netlojix.com> wrote:
>
>
> Il 20/03/2023 15:44, Nigel Pugh ha scritto:
>
> > Hello Federico.
> > Use the m44c. The ideal cartridge is the rock Ola version of this called
> > the m44 MR. It uses the C stylus and has a different plastic body that
> > enables the cartridge to sit up between the 2 mounting posts..
> And that's another trouble I was having, the body of the M44-7 I have
> now it's just a little bit too narrow to fit correctly.
> I'll look for the M44-MR, there's some web site selling it...?
>
>
> --
> Federico Croci
> wiz(a)tilt.it
> www.tilt.it
> _______________________________________________
> Jukebox-list mailing list -- jukebox-list(a)lists.netlojix.com
> To unsubscribe send an email to jukebox-list-leave(a)lists.netlojix.com
> %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
> Searchable Archives: http://jukebox.markmail.org/
>
Il 20/03/2023 15:44, Nigel Pugh ha scritto:
> Hello Federico.
> Use the m44c. The ideal cartridge is the rock Ola version of this called
> the m44 MR. It uses the C stylus and has a different plastic body that
> enables the cartridge to sit up between the 2 mounting posts..
And that's another trouble I was having, the body of the M44-7 I have
now it's just a little bit too narrow to fit correctly.
I'll look for the M44-MR, there's some web site selling it...?
--
Federico Croci
wiz(a)tilt.it
www.tilt.it
Hello everyone!
I found a Shure M44-7 cartridge installed on my AMI Continental 2.
I'd like to fit it with a N44-C stylus, as some of the 45 records I use
are obviously not in very good conditions; I'd like to find out if I can
reduce the skips and jumps I have when playing them.
My question is - if I install a replacement N44-C stylus on a M44-7
cartridge, I'll have the correct tracking force for the N44-C stylus, or
I should install it on a M44-7 cartridge for better results? I'm
interested in the tracking force alone, small differences in audio
quality does not really matter.
The tracking force should be a matter of the stylus installed, not the
cartridge, am I correct...?
Thanks...!
--
Federico Croci
wiz(a)tilt.it
www.tilt.it
Hi Jim,
Tell me more about using Tri Flow as a record lube. I too have noticed the white dust on my Eric 45s but have just lived with it. Does Tri Flow negatively affect the needle?
Thanks, Bill Schaefer
Date: Fri, 17 Mar 2023 10:29:33 +0000 (UTC)
From: JIM & LAURIE DIRKSEN <dirksenj(a)bellsouth.net>
Subject: [Jukebox-list] Re: Eric Records 45RPM record sale
To: Jukebox mailing list <jukebox-list(a)lists.netlojix.com>
Cc: Ed Inman <edinman(a)earthlink.net>
Message-ID: <866410693.795841.1679048973938(a)mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8
The ERIC pressings are soft polystyrene and wear out quickly. You can watch record dust appear as it plays. Someone here mentioned using "tri-flow" as a lubricant for polystyrene records and I've been using it with no issues.
> My advice is use the M44 C stylus. Whatever the cartridge is labelled
> up as , 7 or C, it is the same. Usually the 7 stylus is white and the
> C is light blue.
Thanks for the infos... yes, I'll go with a C stylus. My Conti2 is from
Microtecnica, very nice jukebox, but not easy to adjust to play fine..
I'm also looking for the two metal bumpers bar in the back, they are
missing. Maybe someone made some replacements...?
Bye,
--
Federico Croci
wiz(a)tilt.it
www.tilt.it
Hi Jay,
I have added pics to my Google Drive, here is the link - Hopefully works ok.
https://drive.google.com/drive/folders/1DTal-_lQXpSz-hBsA4dcv0DcAt4E2wqt?us…
A bit of History, I purchased this Amp and Crossover from the USA to replace the missing audio gear as the Jukebox had been butchered and didn't have any audio gear in it.
Hopefully those pictures show enough detail?
Thanks
Iain
>
> Date: Fri, 17 Mar 2023 16:12:21 -0700
> From: Jay Hennigan <jay(a)west.net>
> Subject: [Jukebox-list] Re: AMI Continental 2 Amp R2777B output tube
> type
> To: jukebox-list(a)lists.netlojix.com
> Message-ID: <a5c0fa7e-c9a2-623b-e4e5-1ccdd3a32879(a)west.net>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> On 3/17/23 15:26, Iain Jamieson via Jukebox-list wrote:
> > Hi Everyone,
> >
> > I have an AMI R2777B Basic Amp plus the R2728A power amp.
> >
> > Screened on top of the chassis is 6973 for the output tubes. However, they are not 6973 tube sockets.
> >
> > They are a larger 8 pin socket which looks to be factory installed.
>
> Take pictures of the top and bottom and post to imgur.com. Send a link
> to the list. It's possible they're configured for octal tubes from the
> factory or it was converted if 6973s were unavailable. Could be 6L6,
> more likely 6V6 or 7591. Heater current for 6L6 is double that of 6973
> and could overload the transformer.
>
> > Did these amps ever come out with say 6L6 tubes? The wiring on the sockets suggest it may be these as pin 1 and 6 are not connected, but I couldn't find any info to support this.
>
> On the original 6L6 (and most octal metal can tubes), pin 1 is connected
> to the metal case and used as a shield. This was typically tied to
> chassis ground. Glass 6L6 tubes have pin 1 unconnected and it is often
> used as a tie point.
>
> I noticed that you're in NZ. AMI jukes or parts for them outside of the
> US were often partially sourced locally, sometimes under the BAL-AMI
> label. In that case it's possible that your amplifier is substantially
> different from the USA version.
>
> --
> Jay Hennigan - jay(a)west.net
> Network Engineering - CCIE #7880
> 503 897-8550 - WB6RDV
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Jukebox-list mailing list -- jukebox-list(a)lists.netlojix.com
> To unsubscribe send an email to jukebox-list-leave(a)lists.netlojix.com
> %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
> Searchable archives: http://jukebox.markmail.org/
>
>
> ------------------------------
>
> End of Jukebox-list Digest, Vol 150, Issue 1
> ********************************************
Pintech Ltd
Unit 9, 37 Washbournes Road
Wigram
Christchurch
Ph 0273333716
My 780 has began making a terrible clicking/clacking noise as the record comes up. Sometimes it clears up. Recently it continued until the amp fuse blew. Record continues to come up and play but of course no sound. Suggestions as to where the “bug” is? Thanks
Sent from the all new AOL app for iOS
Hi Everyone,
I have an AMI R2777B Basic Amp plus the R2728A power amp.
Screened on top of the chassis is 6973 for the output tubes. However, they are not 6973 tube sockets.
They are a larger 8 pin socket which looks to be factory installed.
Did these amps ever come out with say 6L6 tubes? The wiring on the sockets suggest it may be these as pin 1 and 6 are not connected, but I couldn't find any info to support this.
Thanks
Iain
Pintech Ltd
Unit 9, 37 Washbournes Road
Wigram
Christchurch
Ph 0273333716
https://www.ericrecords.com/45rpmSale.html
This may be of interest. Send them a list in Excel or Word of the titles
you want. Most are $4. I'm not affiliated other than as a customer.
--
Jay Hennigan - jay(a)west.net
Network Engineering - CCIE #7880
503 897-8550 - WB6RDV
I have a ton of ERIC reissue 45's from the 80s. They were always well mastered and sound great. More often than not better than "Collectibles" which was their main competitor.
My only suggestion is that they really need to publish a list with prices of the NOS titles if they are half way serious about selling them. Even if it's not 100 percent complete or accurate any list is better than no list to help potential customers get started. It's not rocket science.
Just my .02,
Ed
-----Original Message-----
From: Jukebox mailing list <jukebox-list(a)lists.netlojix.com>
Sent: Mar 16, 2023 8:31 PM
To: Jukebox mailing list <jukebox-list(a)lists.netlojix.com>
Cc: Jay Hennigan <jay(a)west.net>, M De Simone <m.desimone(a)rogers.com>
Subject: [Jukebox-list] Re: Eric Records 45RPM record sale
Jay,
Thanks for sharing.
I could use some more 50’s and 60’s music!
Hopefully he has good stock.
Appreciated,
Mauro
Sent from my iPhone
> On Mar 16, 2023, at 7:47 PM, Jay Hennigan via Jukebox-list wrote:
>
> https://www.ericrecords.com/45rpmSale.html
>
> This may be of interest. Send them a list in Excel or Word of the titles you want. Most are $4. I'm not affiliated other than as a customer.
>
> --
> Jay Hennigan - jay(a)west.net
> Network Engineering - CCIE #7880
> 503 897-8550 - WB6RDV
> _______________________________________________
> Jukebox-list mailing list -- jukebox-list(a)lists.netlojix.com
> To unsubscribe send an email to jukebox-list-leave(a)lists.netlojix.com
> %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
> Searchable Archives: http://jukebox.markmail.org/
_______________________________________________
Jukebox-list mailing list -- jukebox-list(a)lists.netlojix.com
To unsubscribe send an email to jukebox-list-leave(a)lists.netlojix.com
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
Searchable Archives: http://jukebox.markmail.org/
