I've been chasing my tail for a couple of days trying to figure out why I can key up DMR repeaters but my QSO is not broadcast to other repeaters; it only stays local. It appears that Brandmeister is no longer routing QSO's from 7-digital personal radio ID's starting with a "1" (and eventually 6-digit repeater Radios ID's starting with a "1", so be ware if you run a repeater)! They say it'll work until 1/1/26, but mine was NOT and changing my RadioID solved the problem. Note that this requires reprogramming of all your radios (and repeaters). Read following if you have a RadioID that starts with a "1" (note the Jan 28th update near bottom): <https://news.brandmeister.network/important-message-for-brandmeister-usa-hams-using-a-radio-id-starting-with-1/> Ken