Commercial P2T might be an option for enterprises, says
consultant
Mar 15, 2011 6:48 PM, By Glenn Bischoff
More From Mobile Voice
Last week at IWCE 2011 in Las Vegas, wireless consultant Andy Seybold
told of the time, five years ago, that he conducted a study for the
American Automobile Association (AAA) that explored whether commercial
push-to-talk service was a viable option for the organization. The answer
was a resounding “no,” he said, primarily because the technology wasn’t
ready. For example, one carrier’s push-to-talk service had a call set-up
time of three to four seconds, which Seybold called “a disaster.”
“But it’s a different story today. The technology is better and the time
is right,” he said, adding that the carrier in question today has “a
much-improved offering that works very well.”
The technology is better because carriers invested billions of dollars to
improve their networks, according to Seybold. He added that only a
handful of significant problems still exist. One concerns group P2T
when everybody is in the same cell sector, a bandwidth shortage can
occur. Another concerns the fact that with the exception of Sprint
Nextel commercial carriers generally offer a limited selection of
P2T-capable devices. “That will get better as operators get more
interested in push-to-talk,” said Seybold, who predicted that someday
customers would be able to download a client to their existing phones
that will make them P2T capable.
And while
in-building issues still exist in some places, “there aren’t many
spots today where you don’t have good coverage,” Seybold said.
Indeed, a plethora of advantages exists to commercial P2T services for
the enterprise sector. One is that commercial coverage footprints
generally are much larger than those offered by land-mobile radio (LMR)
systems. Another is that myriad functions such as P2T voice, cellular
voice, text, Internet access and GPS all can be converged on commercial
devices.
“And, hardened commercial devices are available that are less expensive
than LMR devices and more are coming,” Seybold said.
For these reasons, Seybold believes that any enterprise should take a
look at commercial P2T services, including taxi companies, transportation
companies, delivery services and any business that employs field
technicians or service agents. He even believes that public-safety
agencies also should consider commercial P2T services, but only for
non-sworn personnel. “This is not designed to replace mission-critical
voice for first responders,” he said.
It is especially important, according to Seybold, that any entity that is
operating at 512 MHz or below take a long, hard look at commercial P2T
service because of the Federal Communications Commission mandate that
such systems be converted from the current 25 kHz-wide channels to
12.5-kHz operation by Jan. 1, 2013, a process popularly known as
narrowbanding. The P2T fees currently being offered by the commercial
operators are at an all-time low, which means that such services might be
a far less expensive option compared with narrowbanding an existing LMR
system, Seybold said.
There are other significant problems associated with narrowbanding beyond
cost, according to Seybold. For instance, all radios have to be converted
at the same time, which would be a challenge for many organizations. “You
can mix and match, but the audio quality will go to hell,” Seybold said.
In addition, Seybold said that licensees should expect up to 25%
degradation of the radio signal after narrowbanding. “That means you may
have to add more sites,” he said, which would increase costs
considerably. If that wasn’t enough, any licensee that opts for
narrowbanding will have to modify their FCC license.
So, it might be less costly and a lot less problematic simply to
convert to commercial P2T service, especially for those entities that
have to replace their entire fleet of LMR mobiles and portables. For
those who move in that direction, Seybold offered a few tips:
- Execute the migration in phases, starting with executives and then
moving to field personnel after it has been established that the service
is working properly. Use an IP bridge to connect the existing LMR system
to the commercial P2T service.
- Choose the commercial carrier that has equal to better coverage to
that provided by the legacy LMR system.
- Ask the carrier not only about the devices they offer today that are
P2T-capable, but also about what they are planning to offer in the
future.
- Ask the carrier to provide a pair of phones so that the P2T service
can be tested before any contracts are signed or insist on a 90-day
money-back guarantee.
If they want your business, they will find a way to work with you,”
Seybold said. “You have to remember that you’re not a single customer.
The more lines you have, the more interested they’ll be in you.”
What do you think? Tell us in the comment box below.