A customer brought me a basket case F120 that I'm piecing together. I installed the TT motor mounting plate on the 3 standoffs but when I installed the turntable it hit the top edge of the gripper motor.
I assume there are supposed to be shims / washers between the standoffs and the bottom of the plate???
If so, what thickness ?
Can someone enlighten me? Nigel maybe?
Regards, Rick
On 2026-10-14 7:15 a.m., Jukebox Repairman via Jukebox-list wrote:
A customer brought me a basket case F120 that I'm piecing together. I installed the TT motor mounting plate on the 3 standoffs but when I installed the turntable it hit the top edge of the gripper motor.
I assume there are supposed to be shims / washers between the standoffs and the bottom of the plate???
If so, what thickness ?
Can someone enlighten me? Nigel maybe?
Regards, Rick
Hi Rick,
Aren't there knurled sleeves on the three turntable motor support rods to set the alignment of that?
John :-#)#
On Thursday, October 15, 2026 at 09:48:55 AM PDT, Jukebox Repairman via Jukebox-list jukebox-list@lists.netlojix.com wrote:
A customer brought me a basket case F120 that I'm piecing together. I installed the TT motor mounting plate on the 3 standoffs but when I installed the turntable it hit the top edge of the gripper motor.
I assume there are supposed to be shims / washers between the standoffs and the bottom of the plate???
Are the adjusting nuts on the top of the studs? They're knurled coupling nuts thatgo between the studs and the turntable mounting plate.
Well now I feel stupid. 🤦♂️
I will check those. Thank you both
Rick
On Thu, Oct 15, 2026 at 2:20 PM David Breneman via Jukebox-list < jukebox-list@lists.netlojix.com> wrote:
On Thursday, October 15, 2026 at 09:48:55 AM PDT, Jukebox Repairman via Jukebox-list jukebox-list@lists.netlojix.com wrote:
A customer brought me a basket case F120 that I'm piecing together. I installed the TT motor mounting plate on the 3 standoffs but when I installed the turntable it hit the top edge of the gripper motor.
I assume there are supposed to be shims / washers between the standoffs
and
the bottom of the plate???
Are the adjusting nuts on the top of the studs? They're knurled coupling nuts thatgo between the studs and the turntable mounting plate.
Jukebox-list mailing list -- jukebox-list@lists.netlojix.com To unsubscribe send an email to jukebox-list-leave@lists.netlojix.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Searchable Archives: http://jukebox.markmail.org/
jukebox-list@lists.netlojix.com
-
David Breneman -
John Robertson -
Jukebox Repairman