[Jukebox-list] mm-3 wiring
vtisdale at primenet.com
Fri Jul 28 17:44:32 PDT 2000
I sell transistors real economically thanks vern
8402 N. 18th Ave.
Phoenix, AZ 85021
Visit my website at:
----- Original Message -----
From: Jay Hennigan <jay at west.net>
To: <jukebox-list at lists.netlojix.com>
Sent: Friday, July 28, 2000 4:50 PM
Subject: Re: [Jukebox-list] mm-3 wiring
> On Fri, 28 Jul 2000, James McClave wrote:
> > joe, bill bickers is good, he is down in georgia. im better at tube amps
> > than solid state ones , but it sounds like you may need a rebuld. you
> > might try swapping the output transistors on the amp, they are mounted
> > to the black finned heat sink, you may have to take a cover off to see
> > them. there should be 4 there, 2 for each channel, just swap them in
> > pairs , be careful to install them correctly. jim
> I would not suspect an output transistor based on the reported symptoms.
> A bad output transistor would result in either substantial distortion or
> a completely dead channel.
> More likely to be a coupling capacitor or something in the low-level
> stages, IMHO.
> Jay Hennigan - Network Administration - jay at west.net
> NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/
> WestNet: Connecting you to the planet. 805 884-6323
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
More information about the Jukebox-list