[Jukebox-list] mm-3 wiring

James McClave Trollmasters at webtv.net
Mon Jul 24 14:19:54 PDT 2000


joe, for your selection problem, sounds like the contacts need cleaned
on  your write-in assembly towards the lower right front of the
mechanism.they need to be real clean. use a good contact cleaner or very
very fine  emery paper. if that does not do it, check the alignment of
the little fingers, the alignment procedure is in the manual.  sound
problems- could need amp rebuild, its hard to guees on that. the loud
noise when cycling sounds like the mute switch may need cleaned and/ or
aligned properly to engage at the end of record, you mentioned that you
changed the needle,  how was the audio from the left side before you
changed the needle?  jim

E-mail us at: trollmasters at webtv.net






More information about the Jukebox-list mailing list